The flat roofing is different compared to the traditional slope roof. In a flat roof, the roof is flat as per the name, and it allows using the roof as a living space. The replacement of a flat/level rooftop and the level rooftop fix in Chicago are different & and are contrasted with the customary fix and establishment of the rooftop. Yet, with this flat rooftop, there are a few significant issues that individuals need to face, and we have ordered a rundown of the issues and the simple answer for these issues. So stay tuned to learn about the solutions!
Ponding water issue 💦
One of the essential issues you can get with a level rooftop is the ponding water. As the rooftop is level, the water doesn’t descend due to gravity, so it stays there on the highest point of the rooftop.
As the water stays on the highest point of the rooftop, what happens is that the roofing material begins to get harmed as a result of it. It prompts the development of cracks on the outer layer of the rooftop because of long-haul openness. The water can infiltrate through the roof as well. Moreover, it also causes structural stress, as it gives rise to the formation of mold and mildew growth, as this moisture is what they need for their growth.
As a solution to these issues firstly we have improved the drainage system. When installing the roof, we should create a slight slope so water can flow through and then make drainage in the direction of that slope. Apart from that, we can apply roof coating so that if the water sticks on the roof’s surface, it can not infiltrate the roof through cracks and leaks.
Membrane damage 🧫
The flat roof membranes are susceptible to various forms of damage. Firstly, the roof membrane can be damaged by UV exposure; the IUv traditions can negatively impact the membrane and lose its effectiveness due to wear and tear. The harsh weather conditions, like here in Chicago, can increase the wear and tear process in the membrane. The wear and tear changes increase significantly as the roof membrane is susceptible to contraction and relaxation due to temperature fluctuations. Apart from that, the aging element of the flat roof remembrance and the foot traffic can disturb the membrane and cause wear and tear.
Talking about the solution to these issues, we can do some basic things. We can use the reflective coating. The reflective coating is an effective technique as with the reflective coating, and the membrane does not absorb the UV radiations, so wear and tear are reduced. Moreover, as it reflects sunlight, the chances of contact and relaxation also decrease. And if we think of a solution as a part-time fix, we can use patching and sealing the area damaged by the wear and tear. In case of serious damage, membrane replacement can also be done.
Leaks and moisture infiltration 💧
Another challenge that most flat roofs face is the moisture penetration into the house. As explained earlier about the ponding water, these water accumulations can severely damage the roof, and the moisture can leak into the roof.
The first and foremost important thing to do is detect any leakage to solve this leakage issue and moisture. For detection, you can ask for professional help as well as you can check it personally. After the detection, you can pinpoint the area of leakage and then opt for the sealing solution for the roof, as this helps as a moisture barrier. You can also opt for waterproofing layering as well to stop water infiltration.
Ice dams formation ❄️
The next issue that is faced more often is the formation of ice dams. In arrears like Chicago, there are harsh conditions, and these harsh cold conditions give rise to snowfall. This snow, when it melts and refreezes, creates ice dams.
The ice dams are shaped because of two essential reasons. First is the presence of a lack of insulation in the house. At the point when there isn’t adequate insulation, then, at that point, what happens is that the heat intensity from the house dissolves the ice, and that ice freezes at the overhang. This, thus, adds to the arrangement of the ice dams. Additionally, with unfortunate ventilation, this condition can emerge as the heat intensity can soften the ice, and afterward, it will refreeze.
In the long-term solution to the ice dam issue, you must first improve your house’s ventilation. Without proper ventilation, what happens is that the excess heat is removed, so no melting and refreezing occur. Moreover, you can improve your house insulation as it will not only resolve your ice damming issue but also help you with the increasing electricity costs.in short resolutions, you can use solutions like heated cables to melt the ice at the eaves. You can apply calcium chloride for this purpose as well, and if you want to do it mechanically, you can remove it carefully with the roof rake.
Roofing material selection 📝
The other challenge we have is selecting the roof material best suited for the flat roof. Here in Chicago, you must select the material that best suits the conditions of the climate. There are many options, like the Asphalt-based roofing named modified bitumen. It is known for its durability and weather resistance. Moreover, it is also capable of preventing water infiltration. The other types that are commonly used are TPO and EPDM.TPOs are reflective; thus, they reflect the sunlight and are energy efficient. EPDM is synthetic, and it is widely resistant to temperature changes.
Overall, all these issues can harm your flat roof in case their appropriate solutions aren’t applied. If you want service providers that can do flat roof repairs in Chicago, you can opt for Anchor Point Roofing, as they can effectively do all the repairs, making life easier for you.